About YardsCalculator

In short: YardsCalculator is a free, independent library of construction and landscaping calculators. Each one turns your measurements into the units suppliers sell in (cubic yards, tons, bags, sheets, squares, boxes) and shows the formula and assumptions behind the answer.

Why this site exists

Most material-ordering mistakes come down to unit conversions: square feet confused with cubic yards, inches left unconverted, the wrong density used to turn yards into tons, or no waste allowance at all. Short loads stop a pour, and over-ordering wastes money and leaves a pile in the driveway. We built YardsCalculator to make those conversions fast on a phone at the job site, and transparent enough that you can check them.

What we publish

How we make sure the numbers are right

Every calculator uses standard geometry (length × width × depth, area of circles and triangles, slope factors) and published U.S. industry values, such as manufacturer bag yields, typical aggregate densities, and International Residential Code minimums where they apply. Assumptions are shown on each page and the important ones can be changed in the calculator. Our full process, sources, and correction policy are on the editorial policy page.

Who uses YardsCalculator

Homeowners and DIYers planning a patio, driveway, garden bed or remodel; landscapers and small contractors who need a quick takeoff before calling a supplier; and estimators who want to double-check a number.

What our calculators are not

They are planning tools, not engineering. Structural elements such as footings, retaining walls over about 4 feet, beams, and spans must follow your local building code and, where required, a licensed engineer's design. Prices are editable national ballparks; your supplier's quote is the real number. See our disclaimer.

Independence and advertising

YardsCalculator is free to use and is supported by advertising. Advertisers do not influence our formulas, defaults, or content, and we do not accept payment to recommend products.

Contact and corrections

Found a number that looks wrong, or want a calculator we don't have yet? Contact us. We fix confirmed errors and note significant changes on the affected page.

Last updated: October 8, 2026.