Cement Quantity Estimator

Cement Calculator

Estimate cement bags for any concrete volume using standard mix ratios. This cement calculator and cement estimator pairs with our mix and slab tools for complete batch planning.

Quick answer: cement (kg) = concrete volume (m³) × 1.54 × cement part ÷ total parts × 1,440. For 1 m³ of 1:2:4 concrete: 1 × 1.54 ÷ 7 = 0.22 m³ of cement = 316.8 kg, so you need 7 bags of 50 kg (6.34 rounded up).

US units: 1 cubic yard of 1:2:4 concrete needs about 242 kg (534 lb) of cement, about 5.7 bags of 94 lb, so buy 6.

  • Mix-ratio aware
  • Realtime results
  • Metric-friendly
  • Mobile friendly

Cement Bag Calculator

Enter volume and mix ratio — results update instantly

Bag and Dry Volume Options

Cement Bags—
Cement Volume—
Cement Weight—

How to calculate cement for concrete

When you mix concrete yourself from cement, sand, and coarse aggregate, the recipe is usually written as a volume ratio such as 1:2:4 (one part cement, two parts sand, four parts stone). The dry ingredients shrink in volume once water is added and the mix is compacted, because the sand fills gaps between stones and the cement fills gaps between sand grains. Estimators allow for this with a dry volume factor of 1.54: about 1.54 m³ of dry material makes 1 m³ of finished concrete.

Cement (m³) = wet volume × 1.54 × cement part ÷ sum of parts Cement (kg) = cement m³ × 1,440 kg/m³ · bags = kg ÷ bag weight, rounded up
  1. Find the wet volume of concrete in cubic meters. For a slab: length × width × thickness in meters. (1 cubic yard = 0.7646 m³; 1 cubic foot = 0.0283 m³.)
  2. Multiply by 1.54 to get the total dry volume.
  3. Take the cement share. For 1:2:4 the parts add to 7, so cement is 1/7 of the dry volume.
  4. Convert to weight using 1,440 kg/m³, the standard bulk density of cement used in these calculations.
  5. Divide by bag weight and round up. Use 50 kg for metric bags or 42.6 kg for a 94 lb U.S. portland cement bag.

Worked example

A 3 m × 4 m slab, 100 mm thick, with a 1:2:4 mix and 50 kg bags:

  • Wet volume: 3 × 4 × 0.1 = 1.2 m³; dry volume: 1.2 × 1.54 = 1.848 m³
  • Cement volume: 1.848 × 1/7 = 0.264 m³
  • Cement weight: 0.264 × 1,440 = 380.2 kg
  • Bags: 380.2 ÷ 50 = 7.6 → 8 bags

U.S. version: a 10 × 10 ft patio 4 in thick is 33.3 cu ft = 0.944 m³. At 1:2:4 that needs about 299 kg (659 lb) of cement — 7.02 bags of 94 lb, so the calculator rounds up to 8 bags. That 659 lb is the cement alone, so check the weight of the whole pour before you plan how to move it.

Cement needed per cubic meter and per cubic yard

Computed with the same method as the calculator (dry factor 1.54, cement at 1,440 kg/m³). Bag counts are rounded up.

Cement weight and bags per cubic meter and per cubic yard of concrete for common mix ratios
Mix ratioTypical useCement per m³50 kg bags per m³Cement per yd³94 lb bags per yd³
1 : 1.5 : 3Richer mix, ~M20 nominal403 kg9 (8.06)308 kg8 (7.24)
1 : 2 : 4General concrete, ~M15 nominal317 kg7 (6.34)242 kg6 (5.69)
1 : 3 : 6Lean mix, blinding, ~M10 nominal222 kg5 (4.44)170 kg4 (3.98)

Tips and common mistakes

  • Cement is not concrete. Portland cement is the powder that binds sand and stone together. If you are buying pre-blended bags of concrete mix, use the concrete bag calculator instead — those bags already contain the sand and gravel.
  • Enter volume in cubic meters. This tool works in metric. Convert cubic yards by multiplying by 0.7646, or cubic feet by 0.0283.
  • Match the bag weight to your market. Metric bags are commonly 50 kg (some 25 kg); a standard U.S. bag of portland cement is 94 lb, which is 42.6 kg.
  • Nominal ratios are not a strength guarantee. Ratio mixes are fine for paths, pads, and post footings. Structural concrete in the U.S. is specified by compressive strength (psi) and is normally ordered as ready-mix — follow your plans and local code.
  • Water changes strength. Extra water makes mixing easier but weakens the concrete. Add just enough for a workable mix.
  • Store bags dry. Cement that has absorbed moisture forms hard lumps and should not be used for structural work.

Cement calculator FAQ

How many bags of cement are in 1 cubic meter of concrete?

For a 1:2:4 mix, about 317 kg of cement, or 6.34 bags of 50 kg — round up to 7 bags. A richer 1:1.5:3 mix needs about 403 kg (9 bags), and a lean 1:3:6 mix about 222 kg (5 bags).

How many bags of cement do I need for a cubic yard of concrete?

A cubic yard is 0.7646 m³. At 1:2:4 it needs about 242 kg (534 lb) of cement, which is 5.69 bags of 94 lb portland cement, so buy 6 bags.

Why multiply by 1.54 when calculating cement?

Dry cement, sand, and stone contain air gaps that disappear when water is added and the concrete is compacted. Multiplying the wet volume by about 1.54 gives the dry volume of ingredients you actually need to buy.

Does this calculator include sand and aggregate?

No, it reports cement only. The concrete mix calculator uses the same method and also gives the sand and coarse aggregate volumes for your ratio.

How much does a bag of cement weigh?

In the U.S., a standard bag of portland cement weighs 94 lb (42.6 kg). Many other countries sell 50 kg bags, and smaller 25 kg bags are also common. Set the bag weight field to match what you buy.

How we built this calculator: results use the standard volume, area, and coverage formulas shown on this page, with typical U.S. material densities, bag yields, and waste factors that you can override. Written and checked by the YardsCalculator editorial team. Last reviewed: October 2026.