Cement Mix Estimator

Concrete Mix Calculator

Estimate cement, sand, and aggregate for concrete mix ratios (1:2:4, 1:1.5:3, custom) with dry volume factor, bag count, and batch cost.

Quick answer: each material = wet volume × 1.54 × its part ÷ total parts. For 1 m³ of 1:2:4 concrete that is 0.22 m³ cement (317 kg, 7 bags of 50 kg), 0.44 m³ sand, and 0.88 m³ coarse aggregate, before any waste allowance.

  • Full material split
  • Realtime results
  • Custom ratios
  • Mobile Optimized

Mix Ratio Calculator

1:2:4 nominal mix · 1 m³ wet volume · 50 kg bags

Material Split Preview

Cement Sand Aggregate 1 : 2 : 4 · 1 m³

Custom and Cost Inputs

Cement Bags—
Cement Volume—
Sand Volume—
Aggregate Volume—
Cement Cost—

How to calculate cement, sand, and aggregate

A site-mixed concrete recipe is written as volume parts of cement : sand : coarse aggregate. To turn the recipe into a shopping list, the calculator first converts the finished (wet) volume into a larger dry volume, then splits that dry volume according to the parts. The 1.54 multiplier accounts for the air gaps between dry particles that close up when water is added and the concrete is compacted; some estimators use 1.52 to 1.57, and you can change it in the advanced options.

Material (m³) = wet volume × 1.54 × part ÷ (cement + sand + aggregate parts) Cement kg = cement m³ × 1,440 · bags = kg ÷ bag weight, rounded up · cost = bags × $/bag
  1. Work out the wet volume of the pour in cubic meters (1 yd³ = 0.7646 m³).
  2. Pick a ratio — use a tab for 1:1.5:3, 1:2:4, or 1:3:6, or choose Custom and type your own parts.
  3. Multiply by the dry volume factor to get total dry material.
  4. Split by parts to get cement, sand, and aggregate volumes.
  5. Convert cement to bags at 1,440 kg/m³ and your bag weight, then multiply by your bag price for cement cost.

Worked example

Footings totaling 2.5 m³ in a 1:1.5:3 mix, 50 kg bags at $8 each:

  • Dry volume: 2.5 × 1.54 = 3.85 m³; total parts = 1 + 1.5 + 3 = 5.5
  • Cement: 3.85 × 1/5.5 = 0.70 m³ = 0.70 × 1,440 = 1,008 kg → 20.16 → 21 bags ($168)
  • Sand: 3.85 × 1.5/5.5 = 1.05 m³
  • Coarse aggregate: 3.85 × 3/5.5 = 2.10 m³

Sand and stone are sold by the tonne, cubic meter, or cubic yard depending on the yard. Give your supplier the volumes and ask them to convert with their own material's weight, which varies with moisture and stone type.

Materials per cubic meter of concrete

Calculated with a 1.54 dry volume factor and cement at 1,440 kg/m³. Multiply by 0.7646 for one cubic yard.

Cement, sand, and aggregate quantities per cubic meter of concrete for common mix ratios
Mix ratioCement50 kg bagsSandCoarse aggregate
1 : 1.5 : 30.280 m³ (403 kg)9 (8.06)0.420 m³0.840 m³
1 : 2 : 40.220 m³ (317 kg)7 (6.34)0.440 m³0.880 m³
1 : 3 : 60.154 m³ (222 kg)5 (4.44)0.462 m³0.924 m³

Batching by the bag

One 50 kg bag of cement occupies about 34.7 liters at 1,440 kg/m³. Measure sand and stone in the same container for consistent batches.

Sand and aggregate volume to add per 50 kilogram bag of cement for each mix ratio
Mix ratioCementSand per bagAggregate per bag
1 : 1.5 : 31 bag (34.7 L)52.1 L104.2 L
1 : 2 : 41 bag (34.7 L)69.4 L138.9 L
1 : 3 : 61 bag (34.7 L)104.2 L208.3 L

Mixing tips and common mistakes

  • Measuring by shovel. Shovelfuls vary a lot. Use a bucket or a gauge box for each ingredient so every batch has the same ratio.
  • Too much water. Strength drops as the water–cement ratio rises. A water–cement ratio around 0.45–0.55 by weight is a common target; at 0.5, 1 m³ of 1:2:4 concrete (317 kg cement) needs roughly 158 liters of water, less if the sand is already wet.
  • Ignoring wet sand. Damp sand bulks up and carries water, so a bucket of wet sand contains less sand than a bucket of dry sand. Reduce added water accordingly.
  • Using a ratio for structural work. Nominal mixes suit paths, pads, and small footings. Structural concrete is specified by strength and is normally ordered as ready-mix; follow your drawings and local code.
  • Forgetting waste. The calculator gives exact quantities. Add 5–10% for spillage, uneven subgrade, and material left in the mixer.
  • U.S. bag convention. In the U.S., a 94 lb bag of portland cement is traditionally treated as 1 cubic foot, so 1:2:4 means one bag, 2 cu ft of sand, and 4 cu ft of gravel. Enter 42.6 kg as the bag weight for U.S. bags.

Concrete mix FAQ

What is a 1:2:4 concrete mix ratio?

It means 1 part cement, 2 parts sand, and 4 parts coarse aggregate by volume, before water is added. For 1 m³ of finished concrete it works out to about 0.22 m³ (317 kg) of cement, 0.44 m³ of sand, and 0.88 m³ of aggregate.

How much sand and gravel do I need for 1 cubic meter of concrete?

With a 1:2:4 mix and a 1.54 dry volume factor, you need about 0.44 m³ of sand and 0.88 m³ of gravel. A 1:1.5:3 mix needs 0.42 m³ of sand and 0.84 m³ of gravel, plus more cement.

How many cement bags are needed for 1 cubic meter of concrete?

About 6.34 bags of 50 kg for a 1:2:4 mix, which rounds up to 7 bags. A 1:1.5:3 mix needs about 8.06 bags (9 to buy) and a 1:3:6 mix about 4.44 bags (5 to buy).

Why use a dry volume factor in concrete mix calculation?

Dry materials take up more space than compacted wet concrete because of air gaps and the bulking of sand. Multiplying the wet volume by about 1.54 gives the total volume of dry ingredients to buy.

Which mix ratio should I use?

A 1:2:4 mix is a common general-purpose choice for paths and pads. A richer 1:1.5:3 mix uses more cement for higher strength, and a lean 1:3:6 mix is used for non-structural work such as blinding layers under footings.

How we built this calculator: results use the standard volume, area, and coverage formulas shown on this page, with typical U.S. material densities, bag yields, and waste factors that you can override. Written and checked by the YardsCalculator editorial team. Last reviewed: October 2026.