Walls & Paint

Drywall, Paint & Insulation Calculators

Plan interior wall work from framing to finish: insulation bags, drywall sheets and mud, and gallons of primer and paint.

Quick answer: start with net wall area = perimeter × wall height − doors and windows. Drywall sheets = area ÷ 32 (4×8) or ÷ 48 (4×12), plus about 10%. Paint gallons = area × coats ÷ 350 ft² per gallon.

One measurement, three estimates

Insulation, drywall, and paint all start from the same number: the net area of the walls (and ceiling, if included). Measure the room perimeter, multiply by wall height, and subtract openings. A standard door is about 20 ft² and an average window about 15 ft².

  • Insulation: area ÷ coverage per bag for the R-value and stud spacing you need.
  • Drywall: area ÷ sheet size, plus 10–15% for cuts; then joint compound, tape, and screws scale with sheet count.
  • Paint: area × number of coats ÷ coverage per gallon (typically 250–400 ft²).

Drywall sheet coverage

Drywall sheet coverage
Sheet sizeArea per sheetSheets per 1,000 ft² (+10%)
4 × 8 ft32 ft²35
4 × 10 ft40 ft²28
4 × 12 ft48 ft²23

Frequently asked questions

How many sheets of drywall do I need for a 12 × 12 room?

With 8 ft walls, the walls are 48 ft × 8 ft = 384 ft² and the ceiling 144 ft², total 528 ft². That is 16.5 sheets of 4×8 drywall, so about 18–19 sheets with 10% waste, before subtracting doors and windows.

How much paint do I need for a room?

Divide the paintable wall area by the coverage per gallon (about 350 ft²) and multiply by the number of coats. A 12 × 12 room with 8 ft walls (about 350 ft² after openings) needs about 2 gallons for two coats.

What R-value do I need in my attic?

The U.S. Department of Energy recommends roughly R-30 to R-60 for attics depending on climate zone, with R-49 to R-60 in colder zones. Check the recommendation for your zone.