Driveway & Paving Calculators
Plan a new or replacement driveway: compare costs by surface, then calculate the concrete, asphalt, gravel, and base material to order.
Quick answer: start with area (length × width). Concrete is ordered in cubic yards (area × thickness ÷ 27, about 1.23 yd³ per 100 ft² at 4 in). Asphalt is ordered in tons (about 0.0060 tons per ft² per inch of thickness). Gravel is ordered in tons (cubic yards × about 1.4).
Driveways & paving
Driveway Cost Calculator
Compare gravel, asphalt, concrete, paver and stamped driveway costs with prep, tear-out and permits.
Open calculator →Concrete Driveway Calculator
Driveway concrete yards with thickened edges and apron, gravel base tons, rebar or mesh, joints and cost.
Open calculator →Asphalt Calculator
Asphalt tons for driveways and parking areas.
Open calculator →Asphalt Millings Calculator
Tons and loose cubic yards of millings (RAP) for a compacted driveway surface.
Open calculator →Gravel Driveway Calculator
Tons, yards, fabric, truckloads and cost for a 3-layer gravel driveway: sub-base, base and surface.
Open calculator →Crusher Run Calculator
Tons, loose yards, and truck loads of crusher run with a compaction allowance.
Open calculator →Choosing a driveway surface
Gravel has the lowest upfront cost and works well on long rural drives, but needs regrading and top-ups. Asphalt costs more, is flexible in freeze-thaw climates, and needs periodic sealcoating. Concrete usually costs the most of the three but typically lasts the longest with little maintenance. Pavers are the premium option and individual units can be replaced. Use the driveway cost calculator to compare them for your size.
The base matters as much as the surface
Every driveway type sits on a compacted aggregate base. Soft or clay soils need a thicker base and often a geotextile fabric. Most premature driveway failures (cracks, ruts, potholes) trace back to a thin or poorly compacted base, not the surface material. The gravel driveway calculator sizes each layer; the crusher run calculator handles a single compacted base course.
Typical residential driveway build-ups
| Surface | Typical surface thickness | Typical base | Ordered by |
|---|---|---|---|
| Gravel | 2–4 in surface stone | 4–8 in of larger stone in layers | Ton |
| Asphalt | 2–3 in compacted | 4–8 in compacted aggregate | Ton |
| Concrete | 4 in (cars); 5–6 in for heavier vehicles | 4 in compacted aggregate | Cubic yard |
| Pavers | 2-3/8–3-1/8 in units | 6–12 in aggregate + 1 in bedding sand | Square foot |
Frequently asked questions
How thick should a concrete driveway be?
4 inches is common for passenger cars. Use 5–6 inches, often with thickened edges, where trucks, RVs, or heavy equipment will park. A 12 × 50 ft driveway at 4 in needs about 7.4 cubic yards before waste.
How many tons of asphalt do I need for a driveway?
Multiply area by compacted thickness. A 12 × 50 ft driveway at 3 in is 150 ft³; at about 145 lb/ft³ that is 21,750 lb, or roughly 10.9 tons.
How much gravel do I need for a driveway?
Multiply length × width × depth in feet and divide by 27 for cubic yards, then multiply by about 1.4 for tons. A 12 × 50 ft driveway at 6 in deep is 11.1 cubic yards, or about 15.6 tons before compaction allowance.