Concrete

Concrete & Masonry Calculators

Every tool you need to plan a pour or a masonry wall: volume in cubic yards, bag counts, ready-mix trucks, block and brick quantities, mortar, rebar, and cost.

Which calculator do I need? For flatwork (patios, driveways, garage floors) use the slab calculator. For anything below grade use the footing, wall, or sonotube tools. For fence and deck posts use the post hole calculator. All of them use the same core formula: cubic yards = L × W × D (ft) ÷ 27.

Popular

Volume & bags

Masonry

Cost & quotes

Rebar

How to estimate concrete for any project

Ready-mix concrete is sold by the cubic yard (27 ft³). Bagged concrete is sold by weight, and each bag yields a fixed volume. Every concrete estimate therefore follows the same three steps:

  1. Find the volume in cubic feet. Rectangles: length × width × thickness. Cylinders (piers, post holes): π × radius² × depth. Convert inches to feet first (divide by 12).
  2. Convert to the unit you will buy. Divide cubic feet by 27 for cubic yards, or by the bag yield for bags.
  3. Add waste. 5–10% for formed slabs and walls, 10–15% for earth-formed footings and uneven subgrade.

Bags or ready-mix?

Under about 1 cubic yard, bags are usually practical: that is roughly 45 bags of 80 lb mix. Above 1–2 yards, a ready-mix truck is faster, more consistent, and often cheaper once labor is counted. Expect short-load fees from many plants below about 3–4 yards.

Masonry and reinforcement

Block and brick are counted by wall face area divided by the face area of one unit plus its mortar joint. Standard 8×8×16 in CMU works out to 1.125 blocks per square foot. Rebar is estimated from bar spacing and lap length, then converted to weight using standard ASTM bar weights.

Concrete bag yields and bags per cubic yard

Concrete bag yields and bags per cubic yard
Bag sizeYield per bagBags per cubic yard
40 lb0.30 ft³90
50 lb0.375 ft³72
60 lb0.45 ft³60
80 lb0.60 ft³45

Frequently asked questions

How do I calculate how much concrete I need?

Multiply length × width × thickness in feet to get cubic feet, then divide by 27 for cubic yards. A 10 × 10 ft slab 4 in thick is 10 × 10 × 0.333 = 33.3 ft³, or 1.23 cubic yards before waste.

How many 80 lb bags of concrete are in a yard?

An 80 lb bag yields about 0.60 cubic feet, so one cubic yard (27 ft³) takes 45 bags. With 60 lb bags (0.45 ft³) you need 60 bags per yard.

How much extra concrete should I order?

Add 5–10% for formed slabs and walls with a level base, and 10–15% for earth-formed footings, thickened edges, or uneven subgrade.