Square Feet to Cubic Yards
Area × depth ÷ 324 · results update as you type
Your result
Turn an area in square feet into cubic yards by adding a depth. Enter the area and how deep the material will be, add waste if you want, and get cubic yards, cubic feet and cubic meters.
You cannot convert square feet to cubic yards without a depth: area is flat, volume needs a third dimension. Cubic yards = square feet × depth (inches) ÷ 324.
Example: 150 sq ft × 4 in ÷ 324 = 1.85 cu yd.
Area × depth ÷ 324 · results update as you type
Your result
Cubic yards = square feet × depth in inches ÷ 324
Equivalent: cubic yards = square feet × depth in feet ÷ 27. In metric, cubic meters = square meters × depth in meters.
Square feet measure a flat surface. A cubic yard measures space, so you must say how deep the material will be. The same 150 sq ft needs twice as much material at 6 inches as at 3 inches.
One cubic yard is 27 cubic feet. Spread 1 inch thick (1/12 ft), it covers 27 × 12 = 324 square feet. For a chart of coverage by depth for mulch, see how many yards of mulch do I need.
Assumptions: flat area, even depth, no compaction, no waste unless you enter it.
150 square feet is about 13.9 m². Same area, different depth.
| Depth | Calculation | Cubic yards | Cubic feet | m³ | With 10% waste (cu yd) |
|---|---|---|---|---|---|
| 3 in (7.6 cm) | 150 × 3 ÷ 324 = 450 ÷ 324 | 1.39 | 37.5 | 1.06 | 1.53 |
| 4 in (10.2 cm) | 150 × 4 ÷ 324 = 600 ÷ 324 | 1.85 | 50.0 | 1.42 | 2.04 |
| 6 in (15.2 cm) | 150 × 6 ÷ 324 = 900 ÷ 324 | 2.78 | 75.0 | 2.12 | 3.06 |
Doubling the depth doubles the volume (3 in to 6 in: 1.39 to 2.78 cu yd).
Dividing 324 by the depth in inches gives the area one cubic yard covers.
| Depth | Area covered by 1 cu yd |
|---|---|
| 1 in | 324 sq ft |
| 2 in | 162 sq ft |
| 3 in | 108 sq ft |
| 4 in | 81 sq ft |
| 6 in | 54 sq ft |
| 12 in | 27 sq ft |
The right depth depends on the material and the job, so use the guidance on the matching calculator or from your supplier: mulch, gravel or topsoil. For a project with a length, width and depth, use the cubic yard calculator.
This page gives volume only. Materials differ in weight, so convert with the yards to tons calculator or see how much a yard of gravel weighs.
It depends on the depth: 100 sq ft covers 0.31 cubic yards at 1 inch deep, 0.93 at 3 inches and 1.23 at 4 inches (100 × depth in inches ÷ 324).
Multiply the area in square feet by the depth in inches, then divide by 324. Add a waste allowance, then ask your supplier for the weight per cubic yard of your gravel.
No. Square feet to square yards is an area conversion (divide by 9). Square feet to cubic yards is a volume calculation that also needs a depth.
It depends on the material and the job. Check the guidance on the mulch, gravel or topsoil calculator pages, or your supplier's recommendation, and enter that depth here.
One cubic yard covers 324 square feet at a depth of 1 inch, 162 square feet at 2 inches, and 81 square feet at 4 inches.
How we built this calculator: cubic yards = square feet × depth in inches ÷ 324, with an optional waste percentage applied once to the final volume. It is a planning estimate: confirm quantities with your supplier. Written and checked by the YardsCalculator editorial team.
Sources: 1 yard = 0.9144 m exactly and 1 inch = 2.54 cm exactly (NIST SP 811 Appendix B.8).
Last updated: November 9, 2026